Material questions about our beds

nexmoriaz

Frequently Asked Questions About Bed Frame Materials

Factual information about wood, wood-based materials, metal, upholstery, surfaces, care, and product selection

1. General Information on Material Selection

The material of a bed frame influences its surface appearance, weight, maintenance requirements, construction, and assembly, among other factors.

The suitability of a model does not depend on the material alone. The design, fasteners, intended load, dimensions, and proper assembly are also crucial.

Always check the material, dimensions, load capacity, and care information on the respective product page before ordering.

2. What is the difference between solid wood and wood-based materials?

Solid wood

Solid wood consists of natural wood. Natural variations in grain, color, knots, and texture may be visible and are typical of the material.

Wood-based materials

Wood-based materials are made from wood components and may feature decorative films, veneers, coatings, or lacquered surfaces.

The specific components of a solid wood or wood-based bed frame are detailed in the respective product description.

3. Are differences in grain and color normal in wood?

Differences in grain, texture, and color may occur in wood and real wood veneers.

Individual components of the same piece of furniture may also appear different due to the natural structure of the wood.

Whether a variation is typical of the material or should be considered a product defect depends on its specific extent, the product description, and the overall condition of the goods.

4. What is a metal bed frame made of?

Metal bed frames may consist of tubes, profiles, sheet metal parts, fasteners, and coated surfaces.

Depending on the model, individual components may be made of steel, other metals, plastic, or wood-based materials.

Please refer to the respective product page for the exact material composition and surface treatment.

5. Can metal bed frames make noise?

Noise may occur if fasteners are not sufficiently tightened, components are not correctly aligned, or the bed is uneven.

First, check the screws, fittings, center support, legs, and slat base according to the assembly instructions.

Avoid overtightening, as threads, coatings, or fasteners may be damaged.

6. What materials are used in upholstered beds?

Upholstered beds typically consist of a load-bearing frame, a layer of padding, and an outer cover material.

Depending on the model, the frame may be made of wood, wood-based materials, metal, or a combination of these materials.

The cover may be made of woven fabric, textured textile, velvet-like material, or a faux leather-like surface, provided this is stated on the product page.

7. How do textile cover materials differ?

Smooth woven fabric

The surface has a visible woven structure. Care requirements and sensitivity depend on the fiber type and construction.

Textured fabric

Raised fibers, loops, or pronounced textures may be sensitive to friction and sharp-edged objects.

Velvet-like cover

The direction of the fibers may result in different light, sheen, and pressure effects on the surface.

Faux leather-like surface

The surface is usually wipe-clean but should be protected from heat, harsh cleaners, and mechanical damage.

8. Are upholstery covers removable and washable?

A cover is only considered removable or washable if this is expressly stated in the product description or on a care label.

Non-removable covers must not be forcibly removed from the frame or padding.

For removable covers, follow the specified washing, drying, and ironing instructions to prevent shrinkage or surface changes.

9. How should coated wood surfaces be cared for?

Remove dust with a soft, dry, or slightly damp cloth.

Then wipe away any remaining moisture and prevent water from entering edges, holes, or joints.

Scouring pads, stiff sponges, harsh solvents, and highly alkaline or acidic cleaners should not be used.

10. How should metal surfaces be cleaned?

Clean metal surfaces with a soft cloth and, if necessary, a small amount of water and a mild detergent.

Then dry the cleaned surface completely, especially around screws, welds, and joints.

Steel wool, scouring sponges, and harsh cleaners may scratch or damage coatings.

11. Can light and the room environment change the materials?

Prolonged direct sunlight may cause color changes depending on the material.

Wood and wood-based materials may react to significant fluctuations in humidity and temperature.

Textile and faux leather covers should not be placed directly against radiators or other strong heat sources.

A regularly ventilated, dry interior helps ensure the proper use of the bed frame.

12. Is one material inherently more stable?

The stability of a bed frame cannot be determined by the general material designation alone.

Important factors include material thickness, frame design, center support, the number and position of legs, fittings, and proper assembly.

Therefore, follow the product-specific load and usage instructions and do not exceed the specified maximum values.

13. What role do the slat base and mattress play?

The slat base and mattress must fit the bed frame in terms of dimensions and design.

An unsuitable base, incorrect size, or lack of center support may lead to uneven loading of the frame.

Before ordering, check whether a slat base or other under-springing is included or required separately.

14. Can product colors differ from images?

The display of colors may be affected by screen type, brightness, contrast, device settings, and ambient light.

Additionally, textured fabrics, velvet-like surfaces, and natural wood materials may appear different depending on the lighting.

Therefore, dimensions, material, and color specifications on the product page should be considered together.

15. What should be checked before ordering?

  • Material specifications for the frame, upholstery, legs, and connecting parts;
  • External dimensions of the bed frame and suitable mattress size;
  • Scope of delivery and required additional parts;
  • Stated load and usage instructions;
  • Assembly method and required tools;
  • Care requirements for the respective surface;
  • Space requirements and access routes to the installation site;
  • Compatibility with existing slatted bed base, mattress, or headboard.

16. What should be done in the event of material damage or unclear issues?

Upon receipt, check for breakage, cracks, damaged coating, open seams, or missing components, and document the condition before assembly or cleaning if possible.

Provide our customer service with the order number, the exact product description, and an objective description of the problem.

Clear photos of the packaging, shipping label, and affected area can assist with the inspection.

Your statutory rights in the event of a defective product are not limited by these general material notes.

Contact and Customer Service

If you have questions about the material specifications of a bed frame offered by nexmoriaz, the scope of delivery, or care, you can contact our customer service.

Contact Details

Name:
nexmoriaz

Address:
330 S Victor Ave
Kalamazoo, MI 49048
United States

Email:
globalsupport@nexmoriaz.com

Phone:
+1 (231) 121-4328

Customer Service Hours

Monday to Friday:
09:00–18:00

Saturday:
10:00–16:00

Sunday and public holidays:
closed

Local time in Kalamazoo, Michigan, applies.